Assembly

Let's get your Quiggly mop built

Pick what you've got below, watch the quick clip, and follow along. Most take about two minutes from box to first mop.

1

Toddler Mop assembly

Spray mop
  1. Connect the pole sections. Push them together until the yellow button pops through the hole.
  2. Push the pole into the mop head the same way. This button is white and keyed, so line it up, then push until it pops through.
  3. Fill the bottle with water, screw the cap on, then click the bottle into the mop.
  4. Press a microfiber pad onto the base. It grips on its own.
  5. Squeeze the trigger to spray, then mop.

Good to know: water only, no cleaning solution. The pads are machine washable.

2

Big Kid Mop assembly

Spray mop
  1. Connect the pole sections. Push them together until the yellow button pops through the hole. Add the extension section if you want it taller.
  2. Push the pole into the mop head the same way. That button is white and keyed, so line it up, then push until it pops through.
  3. Fill the bottle with water, screw the cap on, then click the bottle into the mop.
  4. Press a microfiber pad onto the base.
  5. Squeeze the trigger to spray, then mop.

Good to know: works with the extension pole or without it, whatever fits your kid. Water only, no solution. The pads are machine washable.

3

Toddler Cleaning Set assembly

Mop + broom + dustpan
  1. Build the mop. Connect the pole sections until the yellow button pops through, then push it into the white keyed mop head.
  2. Fill the bottle with water, screw the cap on, and click it into the mop.
  3. Press a microfiber pad onto the base.
  4. Build the broom the same way, pushing the handle until the button pops through.
  5. Clip the dustpan onto the broom handle so it stays together.

In the box: spray mop, broom, dustpan, and two microfiber pads. Water only, machine washable pads.

4

Big Kid Set assembly

Mop + broom + dustpan
  1. Connect the mop's pole sections until the yellow button pops through, then push it into the white keyed head. Add the extension for more height if you want.
  2. Fill the bottle with water, screw the cap on, and click it into the mop.
  3. Press a microfiber pad onto the base.
  4. Build the broom the same way until the button pops through.
  5. Clip the dustpan onto the handle for storage.

In the box: spray mop, broom, dustpan, and two microfiber pads. Works with the extension pole or without. Water only, machine washable pads.

Still stuck on a piece?

Send us a photo of where you're at and we'll walk you through it.

Email us

Need fresh pads?

The microfiber pads wash and reuse for ages. When they finally wear out, grab a new pack.

Shop mop pads